Ripple Molding LLC
Ripple Molding #5-2
Ripple Molding #5-2
Couldn't load pickup availability
A flame pattern across a face of about 3/4": the whole profile swings from side to side along the stick, so light flickers over it like a candle flame. A Dutch Golden Age favorite, knife-scraped in solid hardwood.
Ripple molding #5-2 is about 3/4" wide and nearly 1/4" high. Choose maple, cherry, or walnut below. Each stick is 5 feet long.
The profile
From the sight edge out: graduated reeding. Instead of rising and falling, the profile weaves from side to side as it runs, about 3/32" each way and about 3/8" from one swing to the next. The edges are sanded straight, so the molding miters and joins like any other while its face moves in the light. It runs in an organic cadence: a steady rhythm, each swing a little different in length and reach, like hand-made period frames.
Ways to use it
- As the sight-edge molding of a Dutch-style frame, mitered and applied to a base frame
- As a cap or liner, or paired with other ripple profiles to build up a wider frame
- On mirrors, panels, boxes, and casework that call for an antique look
Details
| Width | About 3/4" (0.759") |
| Height | Nearly 1/4" (0.228") |
| Pattern | Flame: the profile swings about 3/32" side to side, about 3/8" from swing to swing |
| Cadence | Organic cadence: a steady rhythm, each swing a little different in length and reach, like hand-made period frames |
| Length | 5-foot sticks |
| Woods | Maple, cherry, or walnut. Unfinished, ready for paint, gilding, or your own finish |
Images show the molding in raw maple; cherry and walnut are cut to the same profile. Like the period originals, each stick shows small variations from the knife and hand finishing. That is part of its character.
Framers and frame builders: ask about trade pricing. Contact us.
Share
